25 Multifunction Process Calibrator

  • Model 25
    Source. Specification Range Basic Accuracy
    DC mV -10 ~ 110mV 0.02%+0.01%
    DC V -1 ~ 11V 0.02%+0.01%
    DC mA 0 ~ 22mA 0.02%+0.02%
    Sink current 0 ~ 22mA 0.02%+0.02%
    Resistance 0 ~40KΩ 0.02%+0.02%
    Thermocouple R/S/K/E/J/T/B/N 0.4℃
    RTD Pt100/Pt200/Pt500/Pt1000/Cu10/Cu50 0.2℃
    Frequency 1Hz ~10KHz ±2words
    Pulse 1 ~100000cyc ±2words
    Switch 1Hz ~110KHz ±2words
    Pressure Depends on the   pressure module
    DC mV -5 ~ 550mV 0.02%+0.01%
    DC V -0.5 ~ 55V 0.02%+0.01%
    DC current -5 ~ 55mA 0.02%+0.01%
    Resistance 0 ~5.5KΩ 0.05%+0.02%
    Thermocouple R/S/K/E/J/T/B/N 0.7℃
    RTD Pt100/Pt200/Pt500/Pt1000/Cu10/Cu50 0.3℃
    Frequency 3Hz~50KHz ±2words
    Switch CLOSE/OPEN 200~300Ω
    Pressure Depends on the   pressure module
    Continuity beeper 0 ~500Ω ≤50Ωsound
    Loop power supply 24V ±10%
    Auto Power-off
    Charging function
    Room temperature display
    Battery detection
    The ramp signal
    RS232 serial communication
    General information
    Safety EN61010-1:2001
    Withstand voltage The input and output AC350V/1 minutes
    Insulation The input and output DC500V /50MΩ.
    EMC EN61326-1:2006
    Certification CE
    Display Double display on the LCD screen
    Power supply 4×1.5V  AAA Alkaline battery
    Product Size 205 × 95 × 42 mm
    Product Weight About 500g
    Standard Quantity Per Carton 10pcs
    Standard Carton Measurement 395mm*385mm*260mm
    Standard Carton Cross Weight 12.4Kg


Multi-function calibrator
Simultaneous measurement and output
24V Loop power
Fast response switch test
High accuracy: 0.02%